Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8.1 Air Filter
If the air filter becomes clogged with dust/dirt, the air filter should be cleaned once
-
every two weeks.
Dismounting
-
Open the air inlet grille and take off air filter.
Cleaning
-
Clean the air filter with neural detergent in lukewarm%40℃&and dry it up in the
shade.
Mounting
-
Putting the air filter into the inlet grille, replace the components as they were.
8.2 Clean the Air-conditioner Surface
First clean the surface with a neutral detergent and wet cloth, and then wipe it with a
dry cloth.
9. Trouble Shooting
9. Troubleshooting
Troubles
1.Unit does not start
when pressing on/off
button
2. Not cool enough
Possible Causes
- Water full indicator lamp blinks,
and water tray is full.
- Room temperature is higher than
the setting temperature. (Electric
heating mode)
- Room temperature is lower than
the setting temperature. (Cooling
mode)
- The doors or windows are not
closed.
- There are heat sources inside
the room.
- Exhaust air hose is not
connected or blocked.
- Temperature setting is too high.
Suggested Remedies
Dump the water out of the
water tray.
Reset the temperature
Reset the temperature
Make sure all the windows and
doors are closed.
Remove the heat sources if
possible
Connect or clean the exhaust
air hose.
Reset the temperature
Advertenties
Hoofdstukken
Inhoudsopgave
