Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DB/WB(℃)
Check up whether the exhaust hose has been mounted properly.
Cautions for cooling and dehumidifying operations:
When using functions on cooling and dehumidifying, keep an interval of at least 3
-
minutes between each ON/OFF.
Power supply meets the requirements.
-
The socket is for AC use.
-
Do not share one socket with other appliances.
-
Power supply is AC220--240V$50Hz
-
6.2 Cooling operation
Press the "Mode" button till the "Cool" icon appears.
-
Press the " DOWN "or" UP "button to select a desired room temperature. (16℃-31℃)
-
Press the " WIND " button to select wind speed.
-
6.3 Dehumidifying operation
Press the "Mode" button till the "Dehumidify" icon appears .
Automatically set the selected temperature to current room temperature minus 2℃. (16℃-
-
31℃)
Automatically set the fan motor to LOW wind speed.
-
6.4 Fan operation
Press the "Mode" button till the "Fan" icon appears.
-
Press the " WIND " button to select wind speed.
-
6.5 Heating operation (this function is not available for a cold-single unit)
Press the "Mode" button till the "Heat" icon appears.
-
Press the " DOWN "or" UP " button to select a desired room temperature. (16℃-31℃)
-
Press the " WIND " button to select wind speed.
-
6.6 Timer operation
Timer ON setting:
When the air-conditioner is OFF, press the "Timer" button and select a desired ON time
-
through the temperature and time setting buttons.
"Preset ON Time" is displayed on the operation panel.
-
ON time can be regulated at any time in 0-24 hours.
-
Timer OFF setting
When the air-conditioner ON, press "Timer" button and select a desired OFF time through
-
the temperature and time setting buttons.
"Preset OFF Time" is displayed on the operation panel.
-
OFF time can be regulated at any time in 0-24 hours.
-
6.7 Auto SWING
After machine turns on, press this key, the louver will swing continuously left and right; by
pressing this button again the movement will stop and the louver remain in that position.
6.8 SLEEP mode
- While in cooling mode, press the SLEEP key to set the temperature. It increases1 ℃ after an
hour and at most increases 2 ℃ after 2 hours.
35/24
18/12
Advertenties
Hoofdstukken
Inhoudsopgave
