Download Inhoudsopgave Inhoud Print deze pagina

ProKlima PK12K Handleiding pagina 39

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

" Put a label on the equipment that the refrigerant is removed.
e) Disposal
" Ensure sufficient ventilation at the working place.
" Remove the refrigerant. If the recovery is not required by national regulations, drain
the refrigerant to the outside. Take care that the drained refrigerant will not cause any
danger. In doubt, one person should guard the outlet. Take special care that drained
refrigerant will not float back into the building.
" Evacuate the refrigerant circuit.
" Purge the refrigerant circuit with nitrogen for 5 min.
" Evacuate again.
" Cut out the compressor and drain the oil.
Transportation, marking and storage for units that employ flammable refrigerants
Transport of equipment containing flammable refrigerants
Attention is drawn to the fact that additional transportation regulations may exist with
respect
to equipment containing flammable gas. The maximum number of pieces of equipment or
the
configuration of the equipment, permitted to be transported together will be determined by
the
applicable transport regulations.
Marking of equipment using signs
Signs for similar appliances used in a work area generally are addressed by local
regulations
and give the minimum requirements for the provision of safety and/or health signs for a
work
location.
All required signs are to be maintained and employers should ensure that employees
receive
suitable and sufficient instruction and training on the meaning of appropriate safety signs
and
the actions that need to be taken in connection with these signs.
The effectiveness of signs should not be diminished by too many signs being placed
together.
Any pictograms used should be as simple as possible and contain only essential details.
Disposal of equipment using flammable refrigerants
See national regulations.
Storage of equipment/appliances
The storage of equipment should be in accordance with the manufacturer's instructions.
Storage of packed (unsold) equipment
Storage package protection should be constructed such that mechanical damage to the
equipment inside the package will not cause a leak of the refrigerant charge.
The maximum number of pieces of equipment permitted to be stored together will be
determined by local regulations.

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Pk14k

Inhoudsopgave