Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Bridge function
The Bridge function allows pairing of two cooking zones into a single combined cooking
zone.
The Bridge function is very convenient, especially when cooking in large pots such as a
baking pan.
in order to activate the Bridge function touch and hold sensor (8) of the front right cooking
zone for 3 seconds. Only touch this sensor when cooking zones are inactive (displays are
dimmed). When the " " symbol is shown for rear right cooking zone touch sensor (8) of the
rear left or rear right cooking zone within the next 3 seconds. The " " will become brighter
and then within 3 seconds touch sensor (2) to set the heat setting.
Now both cooking zones can be controlled at the same time.
To deactivate the Bridge function select the front right cooking zone and then touch the
heat selection sensor field (2) to select "0" heat setting. The Bridge function will turn off after
3 seconds.
Now both cooking zones can be controlled independently.
Switch off cooking zones
● A cooking zone must be active (its display is bright)
● Slide your finger across the heat selection sensor field (2) to reduce the heat setting to
"0".
The cooking zone will be deactivated after approximately 3 seconds.
If a cooking zone is still hot, its display (3) will alternate between showing the
letter "H" and "0."
Switch off the appliance
● The appliance operates when at least one cooking zone is on.
● To switch off the appliance touch the on/off sensor (1).
If a cooking zone is still hot, the relevant display (3) will show the letter "H" to
indicate residual heat.
30
Advertenties
Hoofdstukken
Inhoudsopgave
