Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Control Panel
Heat setting selection sensor (2) is a slider type touch control sensor allowing selection of
heat setting (1-9 and P) by touching and sliding your finger across the marked area (2):
- sliding right - increase the heat setting
- sliding left - reduce the heat setting.
It is also possible to select the heat setting directly by touching the appropriate part of the
heat setting selection sensor field (2).
● Immediately after the appliance is connected to electrical mains, all displays will light up
briefly. Your induction hob is then ready for use.
● The induction hob is equipped with electronic touch control sensor fields, which are
operated by touching with a finger for at least 1 second.
● Touching of a sensor field is accompanied by an acoustic signal to acknowledge.
No objects should be placed on the sensor fields (this could cause an error). Touch sen-
sor fields should be always kept clean.
Switch on the appliance
To switch on the appliance touch and hold the on/off sensor field (1) for at least 1 second.
The appliance is on, when LEDs around sensor (4) will light up, and "0" flashes on all cook-
ing zone displays (3).
If none of the sensor fields is touched within 15 seconds, the appliance switches
itself off.
Switch on the cooking zone
Once the appliance is switched on using the on/off touch sensor (1), select a cooking zone
(1) within the next 15 seconds.
1. When a cooking zone selection sensor field (8) is touched, "0" on the corresponding heat
setting indicator display will become bright.
2. To select the desired heat setting, slide your finger across the setting selection sensor field
(2).
21
Advertenties
Hoofdstukken
Inhoudsopgave
