Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9.7.2.2.2 Flame baffle plates
On delivery the flame baffle plates (see appendix 2, fig. 21) are located in the top section of the appliance. The
flame baffle plates must be removed in a number of situations:
•
•
•
For removing the flame baffle plate, proceed as follows:
Follow the instructions below. Then repeat these instructions on the other side of the appliance.
!Caution
Ø
Lift the left side of the flame baffle plate until it gets above the edge and slide the flame baffle plate to the right.
Ø
Lower the left side of the flame baffle plate and slide the flame baffle plate to the left.
Ø
Slide the right-hand side of the flame baffle plate over the edge.
Ø
Slide the flame baffle plate to the left and lower it until it reaches the lower section of the appliance.
Ø
Now you can remove the flame baffle plate.
Placing the flame baffle plate takes place in reverse order.
The stainless steel profile must be placed at the front with the screw heads on top (see appendix 2, fig. 21).
!Caution
UK
when mounting and checking the flue gas exhaust connection;
when performing maintenance at the flue duct;
when replacing the flame baffle plates.
IN S TA L L A TI O N M A N U A L
Advertenties
Hoofdstukken
Inhoudsopgave
