Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
English
12
Setting the sunset
To start the sunset sequence:
Press + until the lamp is as bright as you want it.
Press A ON so button is elevated and
Sunset will start and the lamp will slowly fade down. The wake-up
sequence will activate at its usual time.
To start the sunset sequence when you don't want the wake-up
sequence (such as on a Friday night):
Make sure A is OFF (button depressed).
Press + until the lamp is as bright as you want it.
Press + and – together.
Sunset will start and there will be no wake-up sequence.
To choose sunset speed:
Make sure A is OFF (button depressed).
Press P repeatedly until program message FADE DOWN 30 (or
60 or 90 or 15) appears.
Immediately press + or – until the desired sunset speed appears.
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
13
Setting the sunset to end as a nightlight
Rather than have the sunset end in darkness, you can set it to act as
a nightlight at 10% of the intensity of the lamp.
A must be OFF (button depressed).
Press P until program message NITELITE OFF appears.
Immediately press + or – until NITELITE ON is set.
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
8
|
www.lumie.com
|
lumie careline 0845 658 9292
(go-to-sleep program)
is displayed.
English
14
Adjusting the brightness of the clock
display
The DISPLAY AUTO mode automatically dims the display at
sleep time (when the light is at a low level and the wake-up or
sunset sequences are set).
To set the display to remain bright, then...
A must be OFF (button depressed).
Press P until the program message DISPLAY AUTO appears.
Immediately press + or – until DISPLAY HIGH is set.
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
15
Setting Sleepsound
Sleepsound is a continuous white noise 'hiss' sound that is useful to
mask outside noises when you want to sleep.
Make sure A is OFF (button depressed).
Press P repeatedly until program message SOUND OFF
appears.
Immediately press + or – until SOUND AUTO appears. This
means the Sleepsound will become quieter with the sunset, falling
silent as the light goes out.
Alternatively press + or – until SOUND PERM (sound
permanent) appears. This means whenever you turn the wake-up
on (A ON, button elevated), the Sleepsound will be heard. The #
symbol on the display shows when Sleepsound is enabled.
To turn the Sleepsound off for just one night ...while the hiss sound
is audible, press A IN and immediately OUT again.
www.lumie.com
(white noise)
|
lumie careline 0845 658 9292
|
9
Advertenties
Inhoudsopgave
