Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
English
6
Setting the clock to 12 or 24 hours
The time display is pre-set as a 12-hour clock. If you prefer a 24-hour
clock...
A must be OFF (button depressed).
Press P repeatedly until program message 12hr appears.
Immediately press + or – until 24hr appears.
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
7
Using the Bodyclock as a reading light
Press + until the lamp is as bright as you want it.
To switch off the light, press – until it goes completely dark.
8
Setting the sunrise
The wake-up function is ON when A is elevated and
Wake-up time is pre-set for 7:00a.m. If you want a different time...
A must be OFF (button depressed).
Press P repeatedly until the program message ALARM TIME
appears.
Immediately press + or – until the alarm time is set. If you are using
the 12-hour clock pay attention to the PM indicator to make sure
you set the correct wake-up time! The PM indicator will light up
when the time shown is between noon and midnight.
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
6
|
www.lumie.com
|
lumie careline 0845 658 9292
(to wake you up)
is lit up.
English
9
Setting the wake-up speed
The wake-up sequence is pre-set so the sunrise starts 30 minutes
before wake-up time.
To change the speed of the wake-up sequence...
Make sure A is OFF (button depressed).
Press P repeatedly until FADE UP 30 (or 60 or 90 or 15 or
DEMO) appears on the display.
Immediately press + or – until the desired wake-up speed appears.
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
Remember to press A again so that the wake-up is ON (button
elevated).
10
Using snooze
When the beeper sounds, press – once to turn it off and leave the
light on. The beeper will sound again 9 minutes later.
If you prefer, when the beeper sounds press and hold – to turn off
the beeper and dim the light. The light will re-illuminate to full
strength over the next 9 minutes then the beeper will sound again.
11
Disabling the back-up beeper
To turn the beeper off at wake-up time when it is sounding, press A.
The beeper is pre-set to ON, to change this...
A must be OFF (button depressed).
Press P repeatedly until the program message reads BEEP ON.
Immediately press + or – until you see BEEP OFF.
Press P to move on to the next setting or wait 12 seconds for the
clock to revert to normal.
The beeper symbol
is displayed when the beeper is on.
www.lumie.com
|
lumie careline 0845 658 9292
|
7
Advertenties
Inhoudsopgave
