Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Selecting a cable dataset
• You can now perform the test immediately, as outlined in 'Testing a coax cable' and 'Testing
a data cable'.
Displaying and deleting a dataset
You can view datasets in the database, modify and delete them.
12. Measuring and saving the speed factor
You require a cable with a known length of more than 10 metres, e.g. 20 m. You must know the
exact length. Measure it again, if necessary, to double check.
• Connect the test cable to the BNC coaxial cable connection (5) or plug the RJ45 connector
plug of a data cable into the network cable connection (6), depending on the cable type.
30
• Select the database ('Library') according to the type
of cable to be tested. Do this with the
button. You can select between the 'Coaxial Library'
and the 'Data Library'.
• Press the
continuously numbered datasets for a cable and
confirm with the TEST OK button (3).
• Press the SET button (7) to display the entire dataset.
• Press the EXIT
confirmation prompt for deletion is shown on the LC display (4). You
can delete the saved data or return to the database.
• Press the TEST OK button (3) to confirm the deletion.
• To cancel and retain the dataset, press the EXIT
display returns to the database.
(1) or
(8) button to select one of the
button (9) to activate the delete option. A
(1) or
(8)
button (9). The
Advertenties
Hoofdstukken
Inhoudsopgave
