Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.2.
Preparing the stove
Please inspect the stove for dam age caused during transport immediately after de-
livery and notify your dist ribut or in case there are any defects. Do not put the stove
into operation in the meant ime.
In order to avoid dam aging the stove during installat ion and t o m ake handling of the
stove easier, it is recom mended to rem ove previously all loose parts (top plate, fire-
resist ant bricks, grille, ashtray, ...) from the stove. Note the locat ion of those part s
while rem oving them , so that you have no difficulties in re- assem bling the part s
later on.
The stove will be supplied with the following parts:
•
A connection collar
•
A blanking plate to seal off the connection opening
•
A sm all shovel to rem ove ashes = a "cold hand" to rem ove the ashtray
3.2.1. Assembling the inner part of the legs
Assembly the inner part of the legs using the bolts: see figure.
3.2.1. Smoke outlet
Your stove is suitable for t wo connections: a
top or a rear connection.
Upon supply, the top and rear ex hausts have
been left open. Depending on the position cho-
sen, one opening can be covered with the
blanking plat e supplied; the other one can be
equipped with the connection collar supplied
(see picture). Use the fix ings supplied and be
sure to tightly seal the connection collar and
the blanking plate to the stove by m eans of the
kit or paste supplied.
In order to m ake the connect ion easier, the top
plate m ay sim ply be removed from t he st ove
and replaced afterwards.
Astroline 2
25
03.27605.000
Advertenties
Inhoudsopgave
