Advertenties
Beschikbare talen
Beschikbare talen
Outside air connection
An optional outside air connection kit is available to order.
(Comes with its own manual - Outside air connection Ø
100, item no. 10026187). The duct connector fi ts Ø100 and
Ø 80 fresh air intake tubes.
This is done before bricking in or building the surround.
Full compliance with fi re codes and regulations is essential if
installing in a pre-existing hearth (open fi replace).
External air supply
Fig. 3
1. The product has an air intake (A) at the rear. If necessary,
the air intake can be moved to the bottom of the product.
See Fig. 4
Fig. 4
2. Unscrew the two screws (B) and remove the air intake
connector (A).
3. Then unscrew the two screws (D) beneath the burn chamber
and remove the cover (C).
4. Install the connector (A) beneath where the cover was
placed and secure the connector with screws (B).
5. Then secure the removed cover over the air intake hole at
the rear. Secure it in place using the same screws.
A
B
A
C
D
Fig. 4-b Requirement for UK - Smoke control areas
The Jøtul I 520 stoves have been recommended as suitable
for use in smoke control areas. Make this adjustments to
prevent complete primary air control closure.
•
Open the door.
•
Pull out the primary air valve handle.
•
Place the screw (included in the screw bag) in the shown
postition (UK ONLY).
ENGLISH
13
Advertenties
Hoofdstukken
Probleemoplossen
