Download Inhoudsopgave Inhoud Print deze pagina

Powering The Radio - PERFECTPRO DABPRO Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Powering the radio

1. Battery operation
Installing the batteries: first turn the battery cover fixture anti-clockwise to loosen and open the battery
cover.
Note:
Before you insert the batteries, check the NiMH/Alkaline switch position. If you use non-rechargeable
batteries, make sure the NiMH/Alkaline switch which located inside the battery compartment is
GB
switched to Alkaline position. If you use rechargeable batteries, make sure to switch NiMH/Alkaline
switch to NiMH position.
Insert 4 x C size (AM-2) batteries into the compartment.
Ensure the batteries are inserted in accordance with the diagram shown.
Close the battery compartment cover and fasten the fixture by turning clockwise.
If the radio is not to be used for any extended period of time, it is recommended that the batteries are
removed from the radio.
Reduced power, distortion and a "stuttering sound" or low battery sign flashing on the display are all
signs that the batteries need replacing or recharging.
When playing on (rechargeable) batteries the output power is less compared to the output power
when playing on AC mains power. Because of this the sound can be somewhat distorted at the highest
volume settings.
2. AC operation
Before you plug the AC power cord into the AC socket, make sure the voltage is correct. If you have
batteries in the radio and use the AC power, the batteries will automatically be disconnected.
AC power cord storage is designed to store the cord when the radio is not in use.
5

Advertenties

Inhoudsopgave
loading

Inhoudsopgave