Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Socket for software upgrade
From time to time, new software features for your radio may be developed. Your radio has therefore
been designed to allow its internal software to be updated using your USB upgrade port.
You should not attempt to update your radio unless it is recommended to you by Perfectpro Customer
Services. Updating the software may remove all radio station presets and settings from your radio.
Software updates for your radio may be available in the future.
As software updates become available software and information on how to update your radio can be
found at:
www.perfectpro.eu
For more information, please contact our Head Office by sending an email to info@perfectpro.eu
1. Use a micro USB cable (not supplied) to connect the USB socket in the battery compartment to your
PC.
2. With your radio switched on, press and hold the Info/Menu button to access the menu for the current
mode.
3. Rotate the Tuning control knob to select "System Setting" and press the Tuning control knob to enter
the system settings menu.
4. Rotate the Tuning control knob to select "Software Upgrade" and press the Tuning control knob to
enter the setting. The default setting is "No". Otherwise, rotate the Tuning control knob to choose "Yes"
and press the Tuning control knob. The display will show "Waiting for PC wizard...".
5. Go to the website above to download the latest software. Follow the on-screen instructions on your
PC provided with the upgrade software to complete the software upgrade.
6. If you do not wish to carry out a software upgrade, rotate the Tuning control knob to choose "No" in
step 4 and press the Tuning control knob.
Note:
Please use AC power cord as main power when upgrading software.
Do not switch off the power to the radio until the update operation is complete and the radio has
restarted, otherwise the unit may become permanently damaged.
Software version
The software display cannot be altered and is just for your reference.
1. With your radio switched on, press and hold the Info/Menu button to access the menu for the current
mode.
2. Rotate the Tuning control knob to select "System Setting" and press the Tuning control knob to enter
the system settings menu.
3. Rotate the Tuning control knob until "SW Version" appears on the display and press the Tuning
control knob. The software version shows on the display.
4. Press and release the Info/Menu button to exit the software version display.
GB
17
Advertenties
Inhoudsopgave
