Advertenties
Beschikbare talen
Beschikbare talen
UP/DOWN manual control buttons and pilot lights (UP/DOWN LEDs - green)
If the UP or DOWN button is pressed for longer than 1 second, the command is stored. The relevant pilot light
flashes and the awning is retracted or extended.
After expiry of the run time, the drive is switched off. The pilot light for the corresponding running direction is
constantly illuminated. Thus the command last given by the control unit can be read at any time.
In order to keep the awning in an intermediate position, the counter command must be activated.
In the blind operating mode, the position of the blind laths can be changed manually by short tapping of the UP or
DOWN button. This is only possible when manual mode is switched on.
Please note that only one setting is possible for the function switches. Therefore, either awning mode or blind mode
can be set.
You will find the function switches on the inner side of the keyboard.
Installation mode
Installation mode serves for operational checking during installation. All
times are reduced, except for the running time. Installation mode is not
E
suitable for normal operation.
N
Selecting the type of awning
G
Awning
L
A light intensity-controlled extension and retraction of the awning occurs
I
in automatic mode.
S
The wind alarm overrides all functions, i.e. if the wind threshold value is
exceeded, the awning always retracts. The sun function is switched off in
H
manual mode. The wind monitoring remains active.
Blind
The functions are identical to awning mode.
In addition, after expiry of the running time in the down direction, the laths
are turned in accordance with the set reversal time. The position of the
blind laths can be changed manually by brief tapping of the UP/DOWN
buttons (only possible with manual mode switched on).
Function in the event of power failure
The system is switched to AUTOMATIC when the power is switched on again.
20
Function Switches
Operating Instructions SWA 50II
Installation mode
Awning mode
Blind mode
Reversal time 0.5 seconds
Blind mode
Reversal time 1.0 seconds
1
2
ON
OFF
1
2
ON
OFF
1
2
ON
OFF
1
2
ON
OFF
Advertenties
Hoofdstukken
