Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TROUBLESHOOTING
Fault
The machine is not
operating
The machine makes
metallic sounds / The
machine mashes the meat
Lack of power supply
WARRANTY
7054 Series Meat Mincing Machines are under warranty for 1 year against manufacturing defects of machines
covering defects in the goods, hidden defects in workmanship and/or hidden defects in material. Warranty is
invalid in case of failure due to violating rules specified in operation instructions. Combisteel BV is not responsible
for any damage or loss that may occur due to operational fault.
Combisteel BV, reserves the rights to change any products without notice. Technical data, drawings, scales,
working capacities and illustrations for informative purposes only. The manufacturer shall not be liable for any
typographical errors that may occur.
Possible cause
The plug may not be connected
The machine may be out of power
supply
The worm may rotate in the
opposite direction
Foreign material may get in the
machine
The machine may be damaged
The lock nut may be loosened
The plate and the blade may become
blunt
The plug may be connected
improperly
Plug cable may be torn and/or there
may be lack of phase
www.combisteel.com
Actions to be taken
Connect the plug to power supply
Check the power supply
Unplug the machine and switch the
two- phase cable
Stop the machine, cut the power
supply and check whether there is or
not foreign material
Stop the machine, cut the power
supply and check all the surfaces
Tighten the lock nut slightly
Sharpen the plate and the blade
Check the plug and correct if necessary
Open the cable and check if there is
any fault if necessary
9
Advertenties
Inhoudsopgave
Probleemoplossen
