Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TRANSPORTATION
Use pallet jack or forklift to transport the machine. Do not move it alone if you don`t have such opportunity.
Machine`s centre of gravity is located in the middle of the body. Pay attention to this point while moving by pallet,
forklift or any other way.
Do not move the machine alone if you don`t have opportunity to transport it by pallet
or forklift. The centre of gravity is in the middle of the body. Pay attention to this point
SETTING UP
-
Set up the machine on straight surface.
-
Make sure the machine is set up properly when operatıng.
POWER SUPPLY
-
Make sure power supply connection is carried out by qualified personnel.
-
Make sure that the voltage of your power supply system suits machines electrical system.
-
Do not use the machine if any part of cable or plug is damaged.
Direction of rotation of feeding screw must be the same as it showed on the body
Do not move the machine by dragging along the ground.
of the machine. If direction of rotation is opposite switch two-phase cable.
(Valid for three-phase models)
Machine is grounded by yellow/green cable and neutralized by blue cable.
www.combisteel.com
while transporting.
6
Advertenties
Inhoudsopgave
Probleemoplossen
