Installing Updates For The Home Connect Software; Resetting Home Connect Settings; Data Protection - NEFF GI7815 Series Gebruikershandleiding
Verberg thumbnails
Zie ook voor GI7815 Series:
- Gebruikershandleiding (52 pagina's) ,
- Gebruikershandleiding (108 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
en Home Connect
In the Home Connect app,
‒
check whether the mobile
device is connected to the
WLAN home network (Wi-Fi).
Repeat the process.
‒
If the temperature display shows
6.
, reset the Home Connect set-
tings. → Page 18
10.4 Installing updates for the
Home Connect software
The appliance searches for updates
to the Home Connect software at reg-
ular intervals.
Note: If updates are available, the
temperature display shows
To reset the update and the temper-
ature display to the set temperature,
press any touch field.
Press .
1.
a The temperature display shows
Press
repeatedly until the
2.
temperature display shows
Press .
3.
a The temperature display shows an
animation.
a The update is installed.
a The control panel is locked during
the installation.
a If the installation is successful, the
temperature display shows
If the temperature display shows
4.
, the appliance was unable to in-
stall the update.
Repeat the process at a later
‒
point.
If the update cannot be completed
5.
after several attempts, contact cus-
tomer service → Page 25 .
18
10.5 Resetting Home Connect
If your appliance experiences con-
nection problems with the WLAN
home network (Wi-Fi) or your appli-
ance wants to log into a different
WLAN home network (Wi-Fi), you can
reset the Home Connect settings.
Press .
1.
a The temperature display shows
Press
2.
temperature display shows
Press .
3.
a The temperature display shows an
animation for 15 seconds.
.
a The temperature display then
shows
a The Home Connect settings have
been reset.
10.6 Data protection
.
Please see the information on data
.
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
.
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
settings
repeatedly until the
.
.
.
Advertenties
Hoofdstukken
Inhoudsopgave
