Inhoudsopgave
Advertenties
en
Switching on
the appliance
Fig. 1
Switch on the appliance with the main
switch 8.
Fig. 2
A warning signal sounds and Alarm
button 1 flashes.
Press Alarm button 1 to switch off the
warning signal.
The Alarm button is lit and the tempera
ture displays flash until the appliance has
reached the set temperatures.
Operating tips
S While the refrigerating unit is running,
beads of water or hoarfrost form at the
back of the refrigerator compartment.
This is quite normal. It is not necessary
to scrape off the frost or wipe off the
beads of water. The rear panel defrosts
automatically. The condensation flows
into the evaporation area of the
appliance via the condensation
channels and the drainage hole.
S The fully automatic Nofrost system
ensures that the freezer and refrigerator
compartments remain free of ice.
Defrosting is not required.
S The sides of the housing are sometimes
heated slightly. This prevents conden
sation in the area of the door seal.
S If you cannot open the freezer compart
ment door immediately after closing it,
wait 2-3 minutes until the partial vacuum
has equalised.
26
Selecting
the temperature
Fig. 2
Refrigeratorcompartment
(can be selected from +2 °C to +8 °C)
Keep pressing temperature selection
button 6 until the required refrigerator
compartment temperature is set.
The value last selected is stored.
The set temperature is indicated
on display 7.
We recommend a setting of +4 °C.
Perishable food should not be stored
warmer than +4 °C.
Freezer compartment
(can be selected from -16 °C to -24 °C)
Keep pressing temperature selection
button 3 until the required freezer
compartment temperature is set.
The value last selected is stored.
The set temperature is indicated on
display 4.
We recommend a setting of -18 °C in the
freezer compartment.
Advertenties
Inhoudsopgave
