Removing The Antenna (Location 3) - Dell OptiPlex 3000 Thin Client Servicehandleiding
Verberg thumbnails
Zie ook voor OptiPlex 3000 Thin Client:
- Installatiegids (11 pagina's) ,
- Servicehandleiding (74 pagina's)
Inhoudsopgave
Advertenties
Steps
1. Remove the adhesive tape from the internal antenna assembly.
2. Align the hole on the internal antenna assembly with the stand on the system.
3. Replace the screw (M3x3) to secure the internal antenna assembly to the system.
4. Route the black antenna-cable under the EMI shielding and through the cable clip with a tool.
Next steps
1. Install the
WLAN
card.
2. Install the
side
cover.
3. Follow the procedure in
Removing the antenna (Location 3)
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
WLAN
card.
About this task
The following image indicates the location of an internal antenna and provides a visual representation of the removal procedure.
34
Onderdelen verwijderen en plaatsen
after working inside your
before working inside your
computer.
computer.
Advertenties
Inhoudsopgave
