Removing The Optional Serial Module - Dell OptiPlex 3000 Thin Client Servicehandleiding
Verberg thumbnails
Zie ook voor OptiPlex 3000 Thin Client:
- Installatiegids (11 pagina's) ,
- Servicehandleiding (74 pagina's)
Inhoudsopgave
Advertenties
Steps
1. To remove the dummy metal bracket, insert a flat-head screwdriver in the hole of the bracket, push the bracket to release
the bracket, and then lift the bracket out from the system.
2. Connect the HDMI module cable to the connector on the system board.
3. Insert the HDMI module into the optional module slot from the inside of the computer chassis.
4. Replace the two (M3X3) screws to secure the HDMI module to the system.
Next steps
1. Follow the procedure in
2. Install the
side
cover.
Removing the optional Serial module
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following image indicates the location of the optional Serial module and provides a visual representation of the removal
procedure.
26
Onderdelen verwijderen en plaatsen
after working inside your
before working inside your
computer.
computer.
Advertenties
Inhoudsopgave
