Advertenties
Beschikbare talen
Beschikbare talen
4. The display
29
30
32
70
Attaching and removing the display
•
Take hold of the display between your thumb and index
finger (ill. 29).
•
Attach the display by pressing the lip on the bottom
down gently and sliding the display onto the holder
from the front, until the lip clicks into place (ill. 30).
•
If the display is attached correctly and the battery has
been slid into the bike properly (don't forget to activate
the battery from the standby setting by pressing the
button on the rear light), the display will be switched on.
For operation and functions, see 4.3 Operating the
display (ill. 31).
•
If this is not the case, check whether the display and/or
battery is/are attached properly to the bike.
NB: The display itself does not have a battery. As soon as
you remove the display from the holder, it will not display
anything. We advise you to take the display with you when
parking your bike, to avoid theft and/or damage.
•
The display can be simply removed by pressing the lip
on the front of the display holder and sliding the display
31
forward (ill. 32).
•
The display can be stored safely in the bike key bag
supplied with the bike.
Advertenties
