Inhoudsopgave
Advertenties
8
8.2
Interface X01 - Power
For mating the output voltage connector (X01) use an M12-K coded 5 pin male connector.
Pin assignment (X01):
1. Pin 1: 0VDC Out;
2. Pin 2: 42VDC Out;
3. Remote ON/OFF plus;
4. Remote ON/OFF return;
5. Pin PE: PE
The power supply can be switched on by shorting the Remote ON/OFF interface and switched off by
an open on that interface. The open circuit voltage is 15V and the short circuit current is about
15mA. The switch can be found on the connector block, which is mounted to the side of the printer.
For more information about the power supply, please
see the Power Supply section.
8.3
Interface X02 - I/O
Pin assignment (X02):
70
gebruikershandleiding
TT-Series
Documentnummer: P-3859
Versiedatum: 3 februari 2022
Advertenties
Inhoudsopgave
