Advertenties
Beschikbare talen
Beschikbare talen
Equivalent sound pressure level at the ear of the op-
erator, dB (A)
Equivalent vibration levels, a
Front/ rear handle 14in.
Front/ rear handle 16in.
Recommended cutting blade
dimensions
Cutting blade di-
Max. cutting
ameter, in./mm
depth, mm/in.
14/350
118/4.6
16/400
145/5.7
Noise and vibration declaration
statement
These declared values were obtained by laboratory type
testing in accordance with the stated directive or
standards and are suitable for comparison with the
declared values of other products tested in accordance
with the same directive or standards. These declared
Sensor for Husqvarna Fleet Services
This product is compatible with the Husqvarna Fleet
machine sensor. The product can then be connected to
Husqvarna Fleet Services
that gives the commercial fleet manager an overview of
all products. For more information about Husqvarna
™
Fleet Services
, refer to www.husqvarna.com.
Wheel kit
The wheel kit is attached at the bottom of the product.
3
Equivalent vibration level, according to EN ISO 19432-1, is calculated as the time-weighted energy total for
vibration levels in different work conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1m/s
fitted to the rail.
40
3
hveq
Blade speed rat-
ing, rpm
5500
4800
Accessories
™
, which is a cloud solution
2
. The measurements for K 1270 II Rail were carried out with RA 10
K 1270 II
104
4.5/3.7
3.9/4.0
Blade speed rat-
ing, m/s or ft/min
100 or 19600
100 or 19600
values are not suitable for use in risk assessments and
values measured in individual work places may be
higher. The actual exposure values and risk of harm
experienced by an individual user are unique and
depend upon the way the user works, in what material
the product is used, as well as upon the exposure time
and the physical condition of the user, and the condition
of the product.
™
Cutting trolley
A cutting trolley makes it easier to cut in floors and
roads, especially long cuts at a set depth. Quick
connections make it easy to install the product on the
cutting trolley.
K 1270 Smart-
K 1270 II Rail
104
3.4/3.5
4.4/3.9
Blade center
Max. blade thick-
hole diameter,
ness, mm/in.
mm/in.
25.4/1 or 20/0.79
5/0.2
25.4/1 or 20/0.79
5/0.2
1631 - 001 - 04.05.2021
Guard
104
N/A
4.7/4.8
Advertenties
