Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Area and volume measurement
The area of rectangular rooms can be calculated automati-
cally by measuring two edges.
• Switch to area calculation mode by pushing button 2.
• Conduct two individual measurements (as described in
b.)) for the room's edges in sequence.
Ensure that you measure two adjacent orthogo-
nal (perpendicular) edges.
• The display (flashing on the left) will display a symbol
for the edge to be measured. The first measurement is
displayed in the top-most display line, the second one in
the middle.
Measurements can be rejected with the
CLR button and repeated.
• The area calculation is displayed in the bottom-most line
and filed in the measured value memory. It is evident as
area/volume via the measured unit and the corresponding
symbol (display element 4).
The volume calculation of a cubic room is conducted ac-
cordingly.
• Switch to volume calculation mode by pushing button
• In addition to the two first measured values for the area
measurement, you also must conduct another individual
measurement (as described in b.)) for the height. The
distance to be measured must be orthogonal on the dis-
tances measured previously.
• The new measured value is displayed in the middle line of
the display. The previous one in the top-most line and the
volume in the bottom line.
(10) -
(2).
55
Advertenties
Hoofdstukken
Inhoudsopgave
