Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Addition and subtraction measurement
• Push and hold the
quent measured values to the current value or the
button to subtract the following measurements from the
current value.
• Conduct the measurements (as described in b.)), but
push the
Combination of the modes is possible. For ex-
ample, you can subtract the distances measured
subsequently from the added values.
• For this, hold the
You can also switch from subtraction mode to ad-
dition mode. After a measurement, the old total
is displayed in the top-most line, the measured
value of the recorded distance in the middle and
the new total value at the bottom. The last meas-
urement can be deleted and repeated via the
(10) - CLR button.
Example addition
The total of all package dimensions must not exceed a
certain limit for shipping. Choose the addition function and
measure the individual edges.
Example subtraction
You want to measure the distance of an edge to a protrusion.
However, the protrusion cannot be clearly recorded from the
edge. The entire wall length is measured and the measure-
ment of the protrusion is deduced with the subtraction mode.
54
(5) button for adding up all subse-
(1)- MEAS button twice.
(6) button to switch the mode.
(6)
Advertenties
Hoofdstukken
Inhoudsopgave
