Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9. Commissioning and
settings
a) Switching the device On and Off
• In order to switch the laser measuring device on, push the
red button
symbol. Ensure that the laser is switched on at once and
that a measurement is performed directly when you keep
this button pushed.
• To switch the device off, push and hold the CLR -
button until the display light goes out. Switching off is
acoustically confirmed. Pushing this button briefly will only
switch the laser off and delete the last measured value.
The device will also switch off on its own if you do not use
it for 3 minutes.
b) Triggering a measurement
• To measure a distance (individual measurement), point
the laser point at the desired position. The direct or small-
est distance is measured between this position and the
device.
• Hold the device steady and push the MEAS -
button.
• Measurement starts with a beep. Another beep follows
upon a mechanical click. The measurement is now com-
plete.
• The current measured value is always displayed in the
bottom-most line (display area 12).
(1) labelled "MEAS" and the laser warning
(10)
(1)
49
Advertenties
Hoofdstukken
Inhoudsopgave
