Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Troubleshooting
Fault
Speed too slow, air
is escaping from the
outlet.
Tool does not move;
compressed air
escapes completely
through the outlet.
PDSS 16 A1
Possible cause
Motor parts
jamming due to
dirt.
Pressure supply
too low.
Motor is jammed
due to material
build-up.
Remedy
Check the pressure
supply filter for con-
tamination; clean and
lubricate the tool.
Check the pressure
supply filter for con-
tamination.
If necessary, repeat the
steps outlined above.
Check the pressure
supply filter for con-
tamination; clean and
lubricate the tool.
GB │ IE
│
51
■
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
