en
Observing drinking water
quality
All materials used in the drinks
dispenser are odourless and tasteless.
If the water has an aftertaste, this may be
caused by:
Mineral and chlorine content
■
of the drinking water.
Material of the domestic water line
■
and connection line.
Freshness of the drinking water. If
■
water has not been dispensed for
a long time, the water may have
a "stale" taste. In this case fill approx.
10 glasses (approx. 1.5 litre) of water
and throw away.
We recommend that you regularly
dispense a little fresh water from
the water maker and that you do not
switch off the appliance. This will ensure
that the best water quality is retained.
Dispensing water
Fig. %
Keep pressing the button until
the required quantity is in the glass.
Dispensing is limited to a time of
30 seconds. Then the dispenser button
must be pressed again if required.
Note
The water from the water dispenser is
cooled to a palatable temperature. If you
would like the water colder, place ice
cubes in the glass before dispensing
the water.
Note
When dispensing fairly large amounts of
water, the dispensed water may become
warmer.
32
Switching water dispenser on/
off
Fig. %
Press water dispenser On/Off button 1.
The button is lit when the water
dispenser is switched on.
Switching button lock on/off
Fig. %
The button lock prevents the appliance
from being operated unintentionally.
Press button lock button 2 for three
seconds. The button is lit when
the button lock is switched on.
Interior fittings
(not all models)
Glass shelves
Fig. &
If required, you can vary the shelves
inside the appliance: To do this, pull out
shelf, lift at the front and take out.
Door shelf
Fig. '
Lift shelf upwards and take out.
Variable shelf
Fig. (
The shelf can be folded down if required:
Pull shelf forwards, lower and press
backwards.
The shelf is suitable for storing food and
bottles.