2 Safety
The Sunny Home Manager may only be connected to the subdistribution of the household on the load side behind the
energy meter of the electric utility company. The Sunny Home Manager must be installed in a switch cabinet or in a
domestic installation cabinet in the area of the additional applications intended for this as per VDE-AR-N
4100:2019-04.
It is possible to use the Sunny Home Manager in delta IT grids. When using the Sunny Home Manager in delta IT
grids, the cumulative power values are correctly measured. Due to the measuring principle of the
Sunny Home Manager, other measured values may be incorrect.
Statutory warranty
The products by SMA Solar Technology AG are not suitable for use in
• Medical devices, in particular products for supplying life-support systems and machines,
• Aircraft, the operation of aircraft, the supply of critical airport infrastructure and airport systems,
• Rail vehicles, the operation and supply of rail vehicles and their critical infrastructure.
The above list is not exhaustive. Contact us if you are unsure whether products by SMA Solar Technology AG are
suitable for your application.
Use SMA products only in accordance with the information provided in the enclosed documentation and with the
locally applicable laws, regulations, standards and directives. Any other application may cause personal injury or
property damage.
The documentation must be strictly followed. Deviations from the described actions and the use of materials, tools, and
aids other than those specified by SMA Solar Technology AG are expressly forbidden.
Any use of the product other than that described in the Intended Use section does not qualify as appropriate.
The documentation supplied is an integral part of SMA products. Keep the documentation in a convenient, dry place
for future reference and observe all instructions contained therein.
This document does not replace any regional, state, provincial, federal or national laws, regulations or standards that
apply to the installation, electrical safety and use of the product. SMA Solar Technology AG assumes no responsibility
for the compliance or non-compliance with such laws or codes in connection with the installation of the product.
2.2
IMPORTANT SAFETY INFORMATION
Keep the manual for future reference.
This section contains safety information that must be observed at all times when working.
The product has been designed and tested in accordance with international safety requirements. As with all electrical
or electronical devices, some residual risks remain despite careful construction. To prevent personal injury and property
damage and to ensure long-term operation of the product, read this section carefully and observe all safety
information at all times.
6
HM-20-IS-xx-21
SMA Solar Technology AG
Quick Reference Guide