Inhoudsopgave
Advertenties
Cleaning the housing
Always remove the plug from the socket before cleaning the housing. Wipe the
cabinet with a clean, soft, lint-free
cloth or soft brush. Do not use
aggressive cleaning agents, scouring
pads or brushes and no chemical
cleaning agents; this can damage the
material. Never use flammable
cleaning agents such as benzene or
methylated spirits. Let the device dry
completely before using it again.
Never immerse the plug, electric cable
or any part of the appliance in water or any other liquid. This can lead to an electric
shock!
Cleaning of the filter
Clean the filter every two weeks; air conditioning with dirty filter does not operate
properly. The filter is located behind the air
intake grid at the back. You can easily open
this grid and remove the filter. Use a vacuum
cleaner or tap the filters lightly to remove
loose dust and dirt. Then rinse the filter clean
in, at most, lukewarm water (not warmer
than 40°C.), potentially with a mild, neutral
cleaning agent. Let the filter dry thoroughly
in the shade before placing it back. Attention!
Never operate the air conditioning without
the filter!
End of season cleaning
If the device is to be stored for a long period, you must take the following
measures!
• Remove the condensed water. Run the unit for a few hours on fan function so
that the unit is completely dry inside.
• Then switch the air conditioning unit off and remove the plug from the socket.
• Clean the filters and reposition them or replace with a new ones.
• Unscrew the waste pipe from the device in order to prevent damage.
• Pack the air conditioning unit in its original packaging or in a plastic bag and
place in a dry place for storage. Place a heavy object on the unit.
• Remove the batteries from the remote control.
• Store the device in a room smaller than 12m² (Cool-Eco 90 A++) and 15m²
(Cool-Eco 120 A+).
52
Advertenties
Inhoudsopgave
