Inhoudsopgave
Advertenties
➢ Using the <Up> and <Down> buttons, set the number of hours after which the
air conditioner has to stop (1-24 hours).
➢ Press the <Timer> button once again. The displays of the air conditioner and the
remote control show the set number of hours.
The air conditioner will automatically stop after the lapsing of the set number of
hours.
Swing function
➢ Press the 'Swing' button, the light on the display lights up.
➢ The flap on top swings continuously from the top to the bottom.
➢ By pressing the button again you switch off the function.
➢ The flap remains in the last position.
Night function
➢ Press on the 'Mode' button until the 'Cool' light shows on the display.
➢ Set the required temperature.
➢ Press the 'Sleep' button, after 1 hour the temperature is reduced by 1°C and
after 2 hours increased by 2°C.
➢ The device continues operating in this mode.
➢ By pressing the 'sleep' button again you switch of the function.
LED display
The display shows the configured temperature or the timer settings. The display also
shows the error codes, see further on in this manual.
Operation via the app
The Cool-Eco can, via Wifi, also be operated with an app. See the separate app
instruction for this.
Additional comments
• When you start the Cool-Eco and opt for a specific function or change function, the
ventilator will work but the compressor will not start immediately: the latter to
protect the internal components. The symbol that belongs to the configured
function blinks on the display, a sign of the 'waiting mode'. This can last 3 to 4
minutes.
• In case of prolonged strong cooling, ice accretion can occur on the interior of the
Cool-Eco. You notice this because the device performs less. To solve this you
switch off the device and give it time to defrost.
• When the required cooling or heating temperature has been attained, the Cool-Eco
will continue ventilating but the compressor discontinues operating.
50
Advertenties
Inhoudsopgave
