Inhoudsopgave
Advertenties
9. General operating notes on program menu
SETUP MENU
CAMERA ID
LIGHT CNTL
WHITE BAL
D/N CNTL
PICTURE
DISPLAY
OPD WINDOW
MISC
END INIT
DEMO
1.
Press ENTER to open the program menu.
2.
Press the UP/DOWN keys to select a menu item.
3.
Press ENTER again to open the submenu of the selected menu item
or to confirm your setting.
4.
To close the program menu, select "END" with the cursor. The display starts to flash. Now
press ENTER.
5.
To reset all factory settings, select "INIT" with the cursor and then press ENTER. (For
emergency cases only!)
OFF
AES
ATW
VIDEO
COLOR POS
UNLOCK
6.
To view all possible settings in operation, select "DEMO" with the cursor and then press
ENTER. To end the demonstration, press ENTER for at least 3 seconds or switch off the
camera power supply for at least 10 seconds.
7.
To change the position of the program menu, select " " with the cursor and confirm your
input with ENTER. With every press, the position of the program menu is moved one line
up.
8.
You can lock access to the program menu to prevent unauthorised access as follows: Select
UNLOCK with the cursor and then press ENTER. To lock the program menu, use the control
keys to select "LOCK". Now close the program menu by selecting END.
TO ACCESS A LOCKED PROGRAM MENU, PRESS THE CONTROL KEYS IN THE
FOLLOWING ORDER: UP, DOWN, DOWN, RIGHT, ENTER
If no further entries are made via the program menu for 2 minutes, all changes are saved and
the program menu is closed.
39
Advertenties
Hoofdstukken
Inhoudsopgave
