Inhoudsopgave
Advertenties
Diameter and position of the cookware
Choose the mode applicable to the size and
the shape of the cookware. The cookware
should cover the selected area as much as
possible.
Place the cookware with the bottom diameter
smaller than 160 mm centrally on a single
section. You can use a roaster pan for the Big
Bridge and the Max Bridge modes.
Place the cookware with the bottom diameter
larger than 160 mm centrally between two
sections.
64
ENGLISH
100-160mm
> 160 mm
Flex Bridge Standard mode
This mode is activated by default when you
activate the function. It connects the sections
into two separate cooking areas. You can set
the heat setting for each area separately. Use
the two control bars on the left side.
Correct cookware position:
Incorrect cookware position:
Flex Bridge Big Bridge mode
To activate the mode press
the correct mode indicator
connects the three rear sections into one
cooking area. The front section is not
connected and operates as a separate
cooking zone. You can set the heat setting for
each area separately. Use the two control
until you see
. This mode
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
