Inhoudsopgave
Advertenties
Change of dust bag and filters
The size and quality of the dust bag
and filters affect the efficiency of the
vacuum cleaner. Use of non-original
dust bags or non-original filters can
cause restricted air flow which may
lead to machine overload. Use of ac-
cessories other than NILFISK original
dust bags and NILFISK original filters
will void the guarantee.
Changing the dust bag
B
The fill level idicator of
dust bag. When indicator
is completly red the dust
bag must be changed in
order to prevent motor
damage.
Always use original dust bags from
NILFISK.
1. Release the hose connection from
the suction inlet by pressing the
locking mechanism and then
remove it.
2. Open the lid to the dust container
by lifting the opening button in front
of/under the suction inlet.
3. Grip the handle of the dust bag
holder and remove the
holder and the full dust bag
from the dust container.
4. Seal the dust bag by pulling the
cardboard flap.
5. Remove the full dust bag from the
dust bag holder.
6. Insert the new dust bag by guiding
the cardboard into the slots of the
bag holder.
7. Insert the dust bag holder with new
dust bag into the dust bag
conainer. Check that the dust bag
is fully opened in the dust
container.
8. Close the lid of the dust container.
9. Insert the hose connection into the
suction inlet and press until the
hose engages with a click.
C
Changing the prefilter
The prefilter protects the motor by
absorbing micro-particles that arn't
captured by the dust bag. Change the
prefilter with every fourth dust bag.
The prefilter is located behind the dust
bag. Always use original filters from
NILFISK.
1. Release the hose connection from
the suction inlet by pressing the
locking mechanism and then
remove it.
2. Open the lid to the dust container
by lifting the opening button in front
of/under the suction inlet.
3. Grip the handle of the dust bag
holder and remove the
holder and the full dust bag
from the dust container.
4. Seal the dust bag by pulling the
cardboard flap.
5. Take out the filter holder with
prefilter.
6. Open the filter holder.
7. Remowe the used prefilter.
8. Fit the new prefilter and close the
filter holder. Check that the prefilter
is correctly fitted in the holder.
9. Place the filter holder in position
and press into place.
10. Insert the dust bag holder with new
dust bag into the dust bag
conainer. Check that the dust bag
is fully opened in the dust
container.
11. Close the lid of the dust container.
12. Insert the hose connection into the
suction inlet and press until the
hose engages with a click.
E
n
g
l
i
s
h
4
Advertenties
Inhoudsopgave
