Inhoudsopgave
Advertenties
Nominal engine output, kW
Spark plug gap, mm
Spark plug type
Fuel and lubrication system
Fuel tank capacity, liter
2
Engine oil
Oil tank capacity, liter
Weight
With empty tanks, kg
3
Noise emissions
Sound power level, measured dB (A)
Sound power level, guaranteed L
4
Sound levels
Sound pressure level at the operator's ear, dB (A)
5
Vibration levels, a
hveq
2
Handle, m/s
Cutting equipment
Cutting height, mm
Cutting width, mm
Blade, article number
1
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
2
Use engine oil of quality SF, SG, SH, SJ or higher. If SAE-30 oil is used at temperature lower than +5 °C,
there is a risk that it does not lubricate the engine sufficiently. This can cause engine damage. Refer to
and replace the engine oil on page 11 for the correct oil for low temperatures. See the viscosity chart in the
engine manual (if included) and select the best viscosity based on the expected outside temperature.
3
Noise emissions in the environment measured as sound power (L
2000/14/EC.
4
Noise pressure level according to ISO 5395. Reported data for noise pressure level has a typical statistical
dispersion (standard deviation) of 1.2 dB (A).
5
Vibration level according to ISO 5395. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 0.2 m/s
461 - 011 - 20.09.2024
1
dB (A)
WA
2
.
GX 560
3.4
0.75
NGK BPR6ES
0.9
Husqvarna SAE30, Husqvarna SAE 5W-30 Synthetic,
Husqvarna SAE 10W-40
0.4
18
96
97
86
3.3
10–30
510
5119004-10
) in conformity with EC directive
WA
To fill
13
Advertenties
Hoofdstukken
Inhoudsopgave
