Inhoudsopgave
Advertenties
Connecting to the mains (230 Volts, A.C., 50 Hz)
The mower operates from any normal household mains supp-
ly, provided with a 16 Amps. fuse.
3
Note: Residual current protection device
These protection devices safeguard while touching
damaged wires, from insulation flaws and in certain cases,
also while damaging live wires.
We recommend that the equipment only be plugged into
a power socket, which is protected by a residual current
protection device (RCD) with a residual current of not
more than 30 mA.
Retrofit kits are available for old installations. Consult an
electrician.
Starting and Stoping
Switch on motor with mowerplaced on level and firm ground.
not in high grass - alternatively tilt slightly
Switch-on motor
P
1. Depress button and hold (1).
2. Lift up bar (2).
3. Release button (1).
Switch-off motor
P
Release bar (2).
Maintenance
General
1
Attention! Rotary cutter blade
Before all maintenance and cleaning work:
pull out the power plug.
Do not touch running blades.
Cleaning
Clean mower thoroughly after each mowing with cloth or
brush.
Do not spray with water.
Winter Storage
Clean mower thoroughly before storing away.
Have your mower thoroughly checked once a year by an ap-
proved Service Centre.
Do not store it in a wet or humid place.
Spare parts
Item number
4907 031
4907 096
G
All manuals and user guides at all-guides.com
Emptying of Grassbox
When the collection bag is full, the flap lowers by itself.
1
3
Tips for mowing
O
.
Changing blades
1
Order description
Vi 37 FM
Q
Attention! Rotary cutter blade
Undertake adjustments on the equipment only after the
motor is switched off and the cutting tool has come to a
standstill.
Switch off motor and pull out power plug.
Empty collection bag.
Remove potential blockages in the cutting space before
starting.
Instructions for level indicator:
For an efficient functioning of the level indicator,
regularly clean the holes under the level indicator in the
collection bag with a hand brush.
To prevent strips of grass from being left unmowed, the cutting
paths must always overlap a few centimeters
Always let cable trail on the cut side of the lawn.
S
For all works on blades, coupling and cutter bars, first of all,
pull out the power plug and wear protective gloves.
Attention!
An unbalance can develop after regrinding of the blade.
Always regrind the blades in a specialist workshop,
because an unbalance check should be undertaken
according to the safety regulations.
Always change blades in a specialist workshop. A torque
spanner of 10 mm is mandatorily required.
Fastening torque of the screws: 6-7 N-m
Product information
Grass catcher
Replacement blade 37 cm
R
.
S
.
13
Advertenties
Hoofdstukken
Inhoudsopgave
