Inhoudsopgave
Advertenties
1. Make sure that the appliance is plugged
into a power socket and turned on.
2. Make sure that your mobile device is
connected to the same wireless network
you want to add your appliance to.
3. To download the app, use your mobile
device's camera to scan the QR code
located on the back cover of the user
manual. You can also download the app
directly from Google Play (Android) or
App Store (iOS).
4. Open the app and register to create an
account.
Configuring the appliance wireless
connection
The onboarding is possible only for 20
seconds after activating the control
panel. If the
symbol turns off,
deactivate and activate the control panel
again.
Follow the instructions in the app to complete
the onboarding process:
1. Make sure the fan and the lighting are
turned off.
2. Touch and hold the
appliance for 3 seconds, the
starts to flash continuously. The
onboarding process is ongoing.
3. Continue to follow the instructions in the
app to complete the onboarding process.
To stop the onboarding process, touch
the
or any of the speed level symbols.
After the successful onboarding, the
appliance emits a single beep, and the
indicator stops flashing and becomes steady.
If the onboarding process is unsuccessful, the
indicator flashes rapidly for 6 seconds and
then turns off. Repeat the procedure.
symbol on your
symbol
83
If the onboarding process exceeds 1
minute, the control panel enters standby
mode, the
indicator turns off, and the
app provides feedback on the onboarding
status.
After onboarding, the
visible once the control panel is activated
and a connection to the internet is
established.
Each time the action is performed using
the app, the
indicator blinks 3 times.
Disabling / Enabling the appliance
wireless connection
To temporarily disable the WiFi connection:
1. Make sure the fan and the lighting are
turned off.
2. Touch and hold the
seconds until you hear a beep.
The
symbol blinks twice and the
symbol turns off.
To enable the WiFi connection again:
1. Make sure the fan and the lighting are
turned off.
2. Touch and hold the
seconds until you hear a beep.
The
symbol blinks once and the
symbol turns on when the connection is
estabilished.
Resetting the appliance wireless
connection
To offboard the WiFi network:
1. Make sure the fan and the lighting are
turned off.
2. Touch and hold the
seconds.
The appliance emits a single beep, and the
symbol blinks until the successful reset. In
some cases the
once.
symbol is
symbol for 3
symbol for 3
symbol for 3
symbol can blink only
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
