Inhoudsopgave
Advertenties
Function
10
WiFi
11
Light colour temperature
12
Lamp
5. DAILY USE
5.1 Using the hood
Check the recommended speed according to
the table below.
While heating up food, cooking with covered
pots.
While cooking with covered pots on multiple
cooking zones or burners, gentle frying.
While boiling and frying big quantities of food
without a lid, cooking on multiple cooking
zones or burners.
While boiling and frying big quantities of food
/
without a lid, big humidity.
Refreshes the air in kitchen after cooking at a
very low noise level. It can be activated and
de-activated by touching the symbol. The
function turns off automatically after 60 mi‐
nutes. Use after cooking only.
It is recommended to leave the hood
operating for approximately 15 minutes
before and after cooking.
Activating the appliance
The control Panel is a sensor field. To
operate the hood touch the symbol
exactly in the middle for at least 1
second.
To operate the hood:
1. Turn on the appliance by pressing the
symbol.
You can now activate the functions.
2. To activate the function touch the symbol.
Description
Indicates WiFi connection status.
Changes the light colour temperature.
Turns the lights on and off. Changes the light intensity.
Deactivating the appliance
To turn off the appliance press the
again.
Perfect Illumination - Lighting
The hood lighting works independently to
other hood functions.
Activating and deactivating the lighting
To illuminate the cooking surface touch the
symbol. Touch the symbol again to
change the light intensity in the following
order: Maximum, Medium, Low, Off.
To switch off the lights, touch and hold the
symbol for 3 seconds.
Setting the light colour temperature
The hood remembers the last setting of
the light colour temperature.
There are two ways to set the light colour
temperature:
1. Touch the
colour temperature from neutral, through
warm to cold.
2. Touch and hold the
smoothly between light colour
temperatures.
Release it once you reach the desired
setting.
AuroraTech®
It is a function that automatically adjusts the
illumination colour and intensity based on the
81
symbol to change the
symbol to move
symbol
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
