Inhoudsopgave
Advertenties
time of day, creating an optimal ambiance.
Use the app to activate this function.
After activating from the app, the function
will operate each time the lighting is
switched on. You can still manually
adjust the lighting settings using the
and
buttons. However, the
AuroraTech® function will be
deactivated.
5.2 Hob2Hood®
It is a function that connects the hob to a
hood. Both the hob and the hood are
equipped with an infrared signal
communicator. The fan speed is determined
based on the mode setting and the
temperature of the hottest cookware on the
hob. Alternatively, you can manually control
the fan using the hob. This function can be
activated from the hob's control panel.
For more information how to use the
function, refer to the hob user manual.
5.3 Filter notification
The filter alarm serves as a reminder to clean
the grease filter and either replace or clean
the charcoal filter, depending on its type. The
symbol blinks regularly for 30 seconds if
the grease filter must be cleaned. The
symbol blinks twice per every second for 30
seconds if the charcoal filter must be
replaced or cleaned.
This function activates independently
after 40 hours of operation for grease
filter and 160 hours of operation for
charcoal filter.
Refer to Cleaning the grease filter in the
Care and cleaning chapter.
Refer to cleaning the charcoal filter or
replacing the charcoal filter in Care and
cleaning chapter.
To reset the function counter in the
notification period, touch the
seconds. The symbol stops blinking for the
correct reset.
The function counter for charcoal filter is
disabled by default. For recirculation
mode, it must be activated.
To activate or deactivate the counter for
charcoal filter:
1. Switch on the control panel.
2. Make sure the fan and the light are turned
off.
3. Touch the
The function is activated if symbols
blink once. The function is deactivated if
symbols
and
5.4 WiFi connectivity setup
This feature enables you to connect your
appliance to a WiFi network and pair it with
your mobile device. Using this feature, you
can access additional functions, control and
monitor your appliance from your mobile
device, and receive notifications.
To connect the appliance you need:
• Wireless network with the Internet
connection,
• Mobile device connected to your wireless
network.
Frequency/Protocol
Power
Encryption
Installing the app
Take the following steps to connect the
appliance to WiFi :
82
symbol for 3
symbol for 3 seconds.
blink twice.
WiFi: 2.4 GHz / 802.11
bgn
WiFi 2.4 GHz: <20 dBm
WPA-PSK, WPA2-PSK,
WPA3-SAE
and
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
