Safety instructions
2.3
INOX (stainless steel)
Pumps with the designation "INOX" are made of
stainless steel. This does not affect their design
or function.
2.4
Thermal protection
The pump is fitted with a thermal protection
switch which switches the motor off in the event
of overheating. After a cooling-down phase of ap-
prox. 15 - 20 minutes the pump switches on
again automatically.
2.5
Pressure sensor
The pump is equipped with a pressure sensor.
This sensor automatically switches the pump off
and on when the set pressure is reached.
■
Set pressure: see technical data.
2.6
Designated use
The pump is intended for private use in house
and garden. It must only be operated within the
scope of its usage limitations in accordance with
the technical data.
The pump is suitable for:
■
Watering the garden and premises
■
Domestic water supplies
■
Water supply pressure boosting.
NOTE
The local regulations must be observed
if the pressure of the water supply is in-
creased. Information is available from
your local plumbing specialist.
The pump is suited exclusively for the conveying
of the following fluids:
■
Clear water, rainwater
Any use not in accordance with this designated
use shall be regarded as misuse.
469929_a
2.7
Possible misuse
The pump must not be used in continuous opera-
tion. It is not suitable for conveying:
■
Drinking water
■
Salt water
■
Foodstuffs
■
Dirty water containing paper and textile
residues
■
aggressive media, chemicals
■
corrosive, flammable, explosive or fuming flu-
ids
■
fluids that are hotter than 35 °C
■
water containing sand and abrasive fluids.
3
SAFETY INSTRUCTIONS
WARNING!
Risk of injury
Defective and disabled
safety and protective
devices can lead to seri-
ous injury.
■
Have any defective
safety and protective
devices repaired.
■
Never disable safety
and protective devices.
19