Inhoudsopgave
Advertenties
assembly
(continued)
motor module
Screw tw o screw s (4.2 x 9.5) halfw ay into the rear holes (1)
in the motor module (see illustration).
2
3
Slide the motor module upw ards in the mounting socket and
pull the motor module backw ard slightly so that it catches in
1
the mounting socket and remains suspended (2).
Fix the front tw o screw s (4.2 x 9.5) as show n in the
illustration (3). Then tighten the rear tw o screw s (2).
M ake the necessary plug connections.
Fit the discharge duct.
low er telescopic pipe
2
Slide the low er telescopic pipe upw ards over the motor
module (1).
Hold the pipe up by carefully pushing a pen or screw driver
into the hole that has been made for this purpose in the front
of the motor housing (2).
1
fitting the hood
Fit the hood to the motor module. First hook the rear of the
4
hood into the motor module from underneath (1). Then push
the front upw ards (2), so that the tw o bolts supplied (M 5 x
1
2
12) can be screw ed in (3). Level the hood using these bolts.
3
M ake the plug connections in the hood.
Allow the low er telescopic pipe to drop (4) so that it slides
into the edge of the hood.
Put the filters in place and test the extractor hood.
GB 16
technical data
type number:
pow er supply:
connected load:
dimensions (h x w x d): see "fitting dimensions"
approvals mark:
This appliance complies w ith the CE directives.
external motors
NB: For appliances w ith an external motor, ATAG
recommends the use of the follow ing types of external
motors:
WA111B5U WA300B5U
WA111C5U WA300C5U
ASVM 0021 AS000387
ASVM 0025 ASVM 0023
disposal of packaging and appliances
The packaging of the appliance is recyclable. It can be
made up of:
– cardboard
– polyethylene
– CFC free polystyrene (PS rigid foam)
– polypropylene straps around the box
Please dispose of these materials in a responsible w ay in
accordance w ith the regulations of your local authority.
Your local authority w ill also be able to give you information
about disposing disused household appliances in a
responsible w ay.
see data plate in the hood
230 V - 50 Hz
see data plate
Kema
GB 17
Advertenties
Hoofdstukken
Inhoudsopgave
