Adjusting The Pressure Plate; Maintenance And Cleaning; General Cleaning And Servicing; Replacement Parts - Grizzly GHS 2842 B Vertaling Van De Originele Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor GHS 2842 B:
- Vertaling van de originele gebruiksaanwijzing (104 pagina's)
Inhoudsopgave
Advertenties
GB
2
Take off the housing plate. This may
require light jerking movements, as the
housing plate also contains two counter
bearings.
3. The blockage can now be removed from
the equipment.
4. When replacing the housing plate (16),
ensure that it is positioned correctly. This
is determined by the blade shaft (17),
pressure plate rod (18) and four threads.
5. Screw on the housing plate (16) firmly
with the four Allen screws (15).
Adjusting the pressure plate
You will recognise that the cutting system has
become worn when the shredding material is
only compressed, and comes out in long chains.
The running-in process may require that you
initially readjust the pressure plate in short
intervals.
1. To switch on the equipment, turn the op-
erating mode selection switch (
right.
2. Turn the adjusting screw (
wise until you hear scraping noises. Small
aluminium shavings will come out of the
ejection chute.
Avoid unnecessary wear on the pres-
sure plate by not over-adjusting.
Maintenance and cleaning
Leave all work not described in this
manual to an authorised customer
service centre. Only use original
parts.
82
All manuals and user guides at all-guides.com
2) to the
A
8) slowly clock-
A
Wear hand protection when working on
the blade cylinder.
Switch the shredder off, unplug it form
the mains, and wait for the blade cylin-
der to come to a complete stop before
working on it.
General cleaning and servicing
Do not spray water onto the
shredder. Electric shock hazard.
•
Always keep the shredder, wheels and air
vents clean. Use a brush or cloth to clean
it, avoid cleaners and solvents.
•
Always check that the shredder and es-
pecially the guards are not worn down or
damaged but firmly attached before use.
Check that the nuts, bolts and screws are
tight.
•
Check the covers and guards for damage
and improper attachment. If necessary,
change the components
•
Keep the shredder in a dry place out of
children's reach. Do not cover the shredder
in nylon bags, as moisture may develop.
Replacement parts
Spare parts and accessories can be obtained
www.grizzly-service.eu
at
Waste disposal and
environmental protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling cen-
tre when you have finished with them.
Machines do not belong with domestic
waste.
Hand over the device at an utilization location.
The plastic and metal parts employed can be
separated out into pure materials and recy-
Advertenties
Hoofdstukken
Inhoudsopgave
