all times when using the shredder.
•
Wear appropriate protective clothing
such as protective gloves, firm foot-
wear and long trousers. Do not wear
loosely fitting clothes or clothes with
dangling cords or belts.
•
Only use the shredder in the open
(that is, away from walls or other
rigid structures) on a firm, level sur-
face.
•
Do not use the machine on a
paved, gravelled area, which
could be damaged by ejected ma-
terial.
•
Before you start up the shredder,
check that all of the nuts, bolts and
other fastenings are tight. Cov-
ers and shields must be fastened
properly and in good working order.
Replace any damaged or illegible
stickers.
•
Only use replacement parts and
accessories supplied and recom-
mended by the manufacturer. Using
third-party parts will immediately
invalidate the guarantee.
•
Do not leave the shredder work-
ing unattended and keep it in a dry
place out of children's reach.
•
Only connect the shredder to a
properly earthed mains power sup-
ply. Make sure that the extension ca-
ble and socket are properly earthed.
•
Connect the appliance to a power
socket with a residual current cir-
cuit
breaker.
Working with the device:
•
Make sure that the funnel feeder is
empty before you start the shredder.
•
Keep your head, hair and body away
from the intake opening.
•
Do not reach into the funnel feeder
during operation. The shredder will
continue to run for a short period af-
ter you switch it off.
All manuals and user guides at all-guides.com
•
Always make sure you are stand-
ing in a firm, balanced position. Do
not lean forwards, and never stand
above the shredder when inserting
materials.
•
Make sure that the material inserted
into the shredder does not contain
hard objects made of metal, stone,
glass or similar.
•
Do not use the shredder in the rain
and in bad weather. Work in daylight
or under good lighting conditions.
•
Do not operate the shredder when
you are tired or distracted, or under
the influence of alcohol or medica-
tion. Always take a break when you
need one and be sensible about
how you work.
•
Switch the shredder off and pull the
plug under the following circum-
stances:
- when you are not using the de-
vice,
- transporting it or leaving it unat-
tended;
- before releasing a jammed
blade.
- when you are checking the de-
vice, cleaning it or removing block-
ages;
- when you are carrying out clean-
ing or maintenance work or re-
placing accessories;
- Before moving or lifting the shred-
der
- If foreign objects should enter the
shredder, if the shredder is mak-
ing unfamiliar noises or vibrations
(check the shredder for damage
before starting it up again)
•
Do not allow shredded material to
accumulate near the ejection area.
This may otherwise hinder proper
ejection and force the material back
up through the feeder.
•
Do not transport or tip the shredder
GB
77