Inhoudsopgave
Advertenties
• Make sure the cord is located so it will not be stepped on, tripped over, or otherwise subjected to damage or stress
• Do not use the charger if it has received a sharp blow, been dropped or otherwise damaged in any way
• DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed 50 °C (122 °F)
• The charger is designed to operate on standard household electrical power (100–240 VAC) Do not attempt to use it
on any other voltage
CAUTION
• Always ensure the work piece to be sanded is firmly fixed in place
• Make sure the abrasive is perfectly centered and firmly attached to the backing pad
• Always pay attention to work safety
• Keep hands clear of the spinning pad during use
• Do not allow the tool to free speed without taking precautions to protect any persons or objects from the loss of the
abrasive or backing pad
Additional safety warnings
• Read all instructions before using this tool All operators must be fully trained in the proper, safe use of this tool
• All maintenance must be carried out by trained personnel For service, contact a Mirka authorized service center
• If the tool appears to malfunction, stop using it immediately and arrange for service and repair
Additional information on battery and charger
• Never attempt to open the battery pack for any reason If the plastic housing of the battery pack breaks or cracks,
immediately discontinue use and do not recharge
Additional warnings
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive harm Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemicallytreated lumber
Your risk from these exposures varies, depending on how often you do this type of work To reduce your exposure to
these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks
that are specially designed to filter out microscopic particles
Technical data
Sander
Voltage
Speed
Orbit
Size of backing pad
Weight (incl. battery) *
Battery charger
Input
Charging time
Storage temperature range
Charging temperature
Dimension
Weight
Degree of protection
Mirka® AROS-B 150NV
10 8 VDC
4,000–8,000 rpm
5 0 mm (3/16")
Ø 32 mm (1 ¼")
0 56 kg (1 24 lbs)
Mirka BCA 108
120 VAC, 60 Hz
< 40 min (2 0 Ah)
–20 °C ... 80 °C (–4 °F ... 176 °F)
4 °C ... 40 °C (32 °F ... 104 °F)
191 x 102 x 86 mm
0 66 kg (1 46 lbs)
II /
Mirka® AROS-B 150NV & AOS-B 130NV • 32 mm (1 ¼") • 10.8 V
Mirka® AOS-B 130NV
10 8 VDC
4,000–8,000 rpm
3 0 mm (1/8")
Ø 32 mm (1 ¼")
0 57 kg (1 26 lbs)
en | us • ca
229
Advertenties
Inhoudsopgave
