Inhoudsopgave
Advertenties
Mounting the device
Before mounting the device, install the mounting bolts and the handle on the back of the device.
The location of the bolts and handle depends on the chosen mounting orientation.
• When mounting the device vertically:
◦ Install the mounting bolts in position 1 and handle in position 2.
◦ Make sure the control panel is located at the bottom of the device.
• When mounting the device horizontally:
◦ Install the mounting bolts in position 3 and handle in position 4.
◦ Make sure the control panel is located at the topside of the device.
Figure 24.
1. Place the mounting bolts
2. Slide the device to the right and let the device drop into the opening of the bracket.
3. To remove the device, lift and slide it in the opposite direction.
ATTENTION
The image below shows the vertical mounting orientation. The mounting
procedure for the horizontal orientation is the same.
32
(Figure
25, pos. 2) over the wall bracket
(Figure
25, pos. 1).
Advertenties
Inhoudsopgave
