Inhoudsopgave
Advertenties
8. USING THE EXTENTION AND ROTATION FEATURE ON THE
CONNECTING POLE
Extend or shorten the length of the telescopic pole(Fig. 1a/Item 8) by loosening(Fig. 9) the Clamp
coupling for telescopic pole(Fig. 1a/Item 11) and pull in or push out the lower section to achieve the
correct height as shown below. Then tighten the coupling.
8.1 Adjusting the angle of pruner in the vertical direction (Fig. 7a-7b)
Press The Rotating button(Fig. 1a/Item 12) on both sides for the angle of tilt adjustment . Now you
can set the pruner to the required tilt. Release the button and allow the pruner to lock into position to
fix the angle of tilt. Four different locking angles are possible. The adjusting range is from 0 ° to 90 °.
8.2 Adjusting the angle of pruner in the horizontal direction (Fig. 8)
Holding The Connecting pole with one hand, and The pruner bracket(Fig. 1a/Item 6) with the other.
Rotate the pruner bracket firmly to the required angle. The adjusting range is from -90 ° to +90 °.
9. OPERATION THE POLE PRUNER
To close the blade activate the handle safety lock-off (Fig. 1a / Item 9) by pushing it forward and
pressing the handle ON/ OFF switch (Fig. 1a /Item 10) at the same time. To open the blade , let go
of the handle ON/OFF switch (Fig. 1a / Item 10).
10. CLEANING, MAINTENANCE AND ORDERING OF SPARE PARTS
Warning! Always wear protective gloves when using, adjusting or cleaning the machine.
10.1 Cleaning
• Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it with compressed air at low pressure.
• We recommend that you clean the device immediately each time you have finished using it.
• Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or
solvents; these could attack the plastic parts of the equipment. Ensure that no water can seep into
the device.
• A few drops of oil (e.g. sewing machine oil) will improve the cutting performance of the blades, but
never apply any grease to the blades.
Important!
Never clean the tool under running water - and particularly never with high pressure -
because of the potential danger to persons and property. Keep your cordless pruner in a dry
and frost proof place. Choose a place that children are unable to enter.
All manuals and user guides at all-guides.com
46
Advertenties
Inhoudsopgave
