Advertenties
Introduction
Please read thoroughly this operation manual and
attached safety instructions to enjoy your new gas hot air
turbine. We further recommend to retain the operation
manual for future references. We reserve right to make
technical changes for the purpose of improvement in the
course of continuous product development.
This is the original operation manual.
Device description (figure A/B)
1.
Fan
2.
Shell
3.
Base
4.
Handle
5.
Piezo-ignition button
6.
ON/OFF switch
7.
Reduction valve
8.
Gas hose/reduction valve connection
9.
Gas hose/heater connection
10.
Reduction valve/gas cylinder connection
11.
Gas valve button
12.
Gas cylinder valve
Technical data
GGH 10
Connection:
Heating power:
Consumption:
Operating pressure:
Turbine capacity:
Type of gas:
Length of power cable:
Degree of protection:
Weight:
GGH 10 INOX
Connection:
Heating power:
Consumption:
Operating pressure:
Turbine capacity:
Type of gas:
Length of power cable:
Degree of protection:
Weight:
Nominal heat output
Minimum heat output (indicative)
Maximum continuous heat output
At nominal heat output
At minimum heat output
In standby mode
Single stage heat output and no room
temperature control
With mechanic thermostat room
temperature control
GGH 17 INOX
Connection:
Heating power:
Consumption:
Operating pressure:
Turbine capacity:
Type of gas:
Length of power cable:
Degree of protection:
Weight:
All manuals and user guides at all-guides.com
230V~50Hz
10 kW
about 0.73 kg/h
300 mbar
500 m³/h
propane/butane
2m
IPX4
5,4kg
230V~50Hz
10 kW
about 0.73 kg/h
300 mbar
500 m³/h
propane/butane
2m
IPX4
5,5kg
Pnom
10kW
Pmin
-
Pmax
-
elmax
-
elmin
-
elSb
-
yes
-
230V~50Hz
17 kW
about 1.24 kg/h
500 mbar
500 m³/h
propane/butane
2m
IPX4
7kg
Nominal heat output
Minimum heat output (indicative)
Maximum continuous heat output
At nominal heat output
At minimum heat output
In standby mode
Single stage heat output and no room
temperature control
With mechanic thermostat room
temperature control
General safety instructions
Read and observe all instructions contained herein before
commissioning and operation of the device.
Keep the safety instructions for future reference!
Only use outdoors and away from combustible materials.
Safe work
Keep your workplace tidy!
Disorder on workplace may result in injuries.
Consider surrounding conditions!
Do not expose to rain.
Do not use in moist or wet environment.
Provide good lighting.
Do not use close to flammable liquids or gases (except for
substances required for operation - here propane/butane).
Keep other persons in a safe distance!
Other persons, particularly children, may not touch the
device and power cable. Keep them in a sufficient distance
from your workplace.
Store your device properly!
The device, if not used, should be stored in a dry and
closed space, out of reach of children.
Do not overload your device!
You will work better and more safely if the device is used
at performance power for which it is designed to.
Use correct device!
Do not use the device for purposes other than intended.
Secure your device correctly!
Connect your device according to instructions in
"Assembly" section.
Take care of your tools!
Observe maintenance directions and instructions.
Check tool cable regularly and ask an authorized specialist
to replace the same if damaged.
Check extension cable regularly and replace, if damaged.
Keep handles dry, without traces of oils and greases.
Be careful!
Be aware of what you are doing. Approach your work with
sound mind. Do not use the device if you are tired.
Check the device for damage!
Before use, check thoroughly all safeguards and slightly
damaged parts if they are still functioning properly.
Check whether rotary parts operate freely and not jammed
or damaged.
All parts must be installed properly and must comply with
conditions so that perfect operation of the device is
ensured.
Pnom
17kW
Pmin
-
Pmax
-
elmax
-
elmin
-
elSb
-
yes
-
Advertenties
