Inhoudsopgave
Advertenties
Vertical oscillation:
Symbol
3D oscillation:
All oscillation symbols are illumi-
nated.
Anion function
The anion function refreshes
the ventilated air. With the
anion function activated, the
symbol is flashing. The anion
function is always deactivated in
the factory. If you want to use the
anion function, you must switch
it on by pressing the „ANION"
button. The negative ions that are
now generated, clean the room
air, dust particles are reduced.
To switch off the function, press
the „ANION" button again. This
setting can only be made directly
on the appliance and not via the
remote control unit.
Timer
9.
Via the „Timer" button you can
select the desired runtime of the
appliance. This is possible in the
range from 0.5 hour to 7.5 hours.
Press the „Timer" button until the
desired number of hours appears
in the display. After this time
elapses the appliance switches off
Copyright UNOLD AG | www.unold.de
automatically. If you do not make
a time setting, the appliance will
run continuously.
Memory function
10. When you switch off the appli-
ance, the currently selected set-
tings will be saved and the appli-
ance will start in the same mode,
the next time you switch on the
appliance. Only the time prese-
lect and sleep mode cannot be
saved.
Safety function
11. Caution: When the basket of the
appliance is touched, the appli-
ance will switch off immediately
for safety reasons. All displays
will flash on, the fan will no lon-
ger turn. After several seconds the
appliance will switch on automa-
tically.
Switching off
Press the foot switch „OFF" or the
„OFF" button on the remote con-
trol unit to switch off the appli-
ance. When you are no longer
using the appliance, unplug the
plug from the electrical outlet.
21
Advertenties
Inhoudsopgave
