Inhoudsopgave
Advertenties
Maintenance and storage
EN
• Welding equipment must be carefully cleaned after each working shift. Use neutral soap with clean water
for cleaning.
• Solvents will damage both the hood and the optical fi lters.
Scratched fi lters must be replaced with new ones.
Store the cleaned hoods only in dry and cool environment beyond the reach of direct sunlight
and dirt.
• Use only original spare parts.
Recycling
This system must be disposed of in accordance with local regulations for the disposal of waste of this kind.
Approved according to:
CA-28 Euromaski complies with the European requirements specifi ed in 89/688/EEC in compliance with EN
166, EN 169, EN 170 and EN 175. The product was allocated the CE marking.
CA-28 Euromaski has been tested and approved for use with the CleanAIR® powered air purifying respirators
and pressure systems in accordance with EN 12941/A2 and EN 14594:2005 as amended by subsequent
provisions. For the list of approved combinations and protection levels classifi cation see Table C.
Declaration of Conformity is available at: https://www.clean-air.cz/doc
Notified body for testing CE:
6
6
Occupational Safety Research Institute, v.v.i.
Jeruzalémská 1283/9, 110 00 Prague 1
Notified body 1024
Advertenties
Inhoudsopgave
