Inhoudsopgave
Advertenties
3.4 Correct Wall / Ceiling Position
4.0 Operating
Product Key Function:
1.
Turn on the power, the product is in standby mode display (- -);
2.
Press key function: press the button, then press the heat levels (L1-L2-L3-L4- standby - off)
4.1 Remote control instructions
Noted: All MARK Infra ER+ heaters and their remote controls have the same frequency, so it is
possible to control several heaters with just one remote.
4.1.1 Inserting batteries (not included)
Insert 2 AAA/ Alkaline type batteries into your remote control
1.
Flip the backside of your remote control and pull out battery cover. Insert the batteries in
accordance with the instructions and polarity the batteries.
2.
Change the batteries in the same way depicted above.
8 8
1.
POWER BUTTON: Turn the heater off.
2.
UP BUTTON: Increase timer and level.
3.
DOWN BUTTON: Decrease timer and level.
4.
LEVEL BUTTON: Use to adjust the heat levels(L1-L4). Press the
Level button then use the up and down buttons(buttons 2 and 3) to
increase or decrease the heating level.
5.
TIMER BUTTON: To set the timer from 0H-24H, which is the
number of hours it will run. 0H will display and then adjust to the
number of hours you would like to set, using the up and down
buttons(2 and 3).
Advertenties
Inhoudsopgave
